GN Hear & Now

TECH IN A SEC

HEARING AID PROGRAMMING STEPS

ReSound hearing aids programmable in Aventa 3.10 may need to be restored with the latest firmware if any of the following problems are encountered:
  • Synchronisation not working
  • Calibration keeps on failing
  • Connection and function issues between MFI devices and apple IOS.
NB: This procedure requires a wired connection for stability (i.e. connection via NOAHlink, Speedlink or Hi-PRO). You may wish to save your fitting session as current hearing aid settings and software settings will be erased after the update.
STEP 1 - Attach programming cables to hearing aid(s).
STEP 2 - Connect the hearing aid(s).
STEP 3 - In the Fit screen, click on instrument at the top menu and select Update Instrument(s). 
STEP 4
The pop up message will tell you if the hearing aid firmware is up to date. If an update is available, click update instrument. 
STEP 5
Click continue (hearing aid settings and software settings will be erased during the update so make sure you have saved your fitting session).

STEP 6
After the firmware has been successful, reload the software settings back into the hearing aids.